Click for English.

Plasma Torch System

Torç sistemi

Paschen eğrisi

Paschen eğrisi

Many experiments with our high voltage AC RF power supply

Possible experiments :

  • Atmospheric pressure torch experiments
  • Torch experiments with gases: Ar, N, He, O2
  • Torch current-voltage characteristics
  • Torch plasma emission spectrometer studies
  • Measurement of electron temperature and electron density by Langmuir probes
  • Torch plasma light intensity, power, frequency effects
  • Torch tip temperature measurements
  • Surface activation and hydrofilic surface production
  • Sterilization with surface activation
  • Gas mixture experiments

Torch plasma Experiments

TECHNICAL INFORMATION
Power Supply            : 1 phase 1 neutral, 220V-240V, 50Hz,100W-200W
Power supply output  : 0-18kV adjustable DC/5-20kHz RF
Torch tube dimensions : D=10 mm L=120 mm, 1 pneumatic input
Gases Connection       : Pneumatic 8 mm 2 inputs:10 lt argon, nitrogen, helium, oxygen etc.
Light intensity measurements: Fotodiode, 200-800 nm/microampermeter
Spectrometer measurements: Emission spectrometer 200-800 nm

Plasma torch system can be used for surface activation prior to thin film coating to all surfaces. 10 lt (or bigger) gas tubes can be used in our system at any flow rates. The flows of two individual gases can be measured by flow meters and these gases mix in a mixer manifold bfore transferred to torch gasinput. The torch head placed to a quartz tube is designed such that 0.5-2cm long discharge can be obtained. When this discharge plasma beam hits the targets (plastic, glass, metal surfaces), their surface tensions can be increased so that hydrophilic property is achieved. It is possible to get also micro-organism elimination (sterilization) thanks to the surface activation by our torch. This system is used with the RF power supply (our own production) whose output can be set between 0-18kV DC or AC voltages. Besides voltage adjustments, the frequency can also be adjusted between 1-30 kHz. By using this system a variety of high level plasma experiments can be conducted. Torch plasma characteristics can be examined by changing (gas mixtures, flow rates, gas types, power ratings, frequency, etc.). A Rogowski coil placed near the tip of the torch can be used plasma oscillations by an oscilloscope connection. There are 2 inputs for the gases and 2 flow meters before gas mixing manifold. If desired, the number of gas entries can be increased.


i
Back      Next

Experiment manuals and education are free and technical help are provided for the next 2 years.

Extra discount is possible if more than 1 experiment set is purchased.

bottom